Firmware Images and Errata
From ECCWiki
Contents |
[edit] Current Firmware Version
Please update to the latest firmware revision if any of the Errata effect your operations. Users may want to subscribe to this page to keep up to date with new firmware releases.
[edit] Firmware v3.1 - released 7/18/2010
[edit] New Features
- Same as 3.0, but fixes Brewbuddy iPhone app problem, firmware display, and Digi16 errata.
[edit] Errata
- Alarm Off doesn't turn off alarm, problem with new auto refresh. Workaround: Press Alarm Off and then reload the page.
- Manual Mode temperature association labels incorrect for new 462 temp[4:7]
- Process run/stop lights aren't present in Datalog page
- Timer count downs don't work in upper processes (4-7)
[edit] Firmware v3.0 - released 7/15/2010
[edit] New Features
- 8 process support, with separate process config files
- BCS-462 support (8 temps, 18 outs, 8 dins)
- Ladder Logic beta
- State/Process names in pulldowns
- Process Edit button
- All Stop button, kills all processes, zeros all outputs
- Auto Refresh
- One-shot DINS
- Persistent timers (continue from state to state)
- Resize gauges, small medium large, and table for phones.
- BCS network finder support
- Apply/Refresh weirdness fixed.
[edit] Errata
- Experienced issues in Chrome with process config file upload (restore). Please use Firefox for this feature.
- Bug prevents Brewbuddy process enables.
- Displays 'BCS-462' in Firmware revision on System Settings page, regardless of 460/462.
- Digi16 doesn't update
[edit] Firmware v2.1 - released 3/9/2010
[edit] New Features
- Fixes errata in v2.0: Allows multiple Digi16 cards, and properly checks for config file compatibility.
[edit] Errata
- Alternate PID doesn't display correct alternate temperature probe association in 'Current State Properties'
[edit] Firmware v2.0 - released 11/18/2009
[edit] Brew Buddy Incompatibility
This firmware is currently incompatible with the Brew Buddy(iPhone App), This application is currently being updated, but the apple approval process will make this take a couple of weeks before the brew buddy can support 2.0 version of the firmware. -the Brew Buddy Developer, np0x.
UPDATE: This should be resolved as 2009.12.08...get an update from the app store...
[edit] New Features
- New <canvas> gauges (no more java applet)
- Output PWM Control
- Alternate PID
- Helper Links to Documentation on every page.
- Single Digital I/O Expansion card support Digi16
[edit] Errata
- Doesn't properly check for config file compatability. v1.x config files not compatible, if loaded will result in bad settings.
- Multiple Digi16's not supported.
Note: v2.0 added some new parameters to the config file to support expansion cards, so v1.x config files are not compatible. See Open Interface for more details.
[edit] Errata
- None
[edit] Firmware v1.3 - released 6/2/2009
[edit] New Features
- Celsius mode
- Customizable header text
- Data Log updates - Switched to a hh:mm:ss format on the X axis. Improved data log rounding.
- Ability to hide temperature gauges
[edit] Errata
- None
[edit] Firmware v1.2 - released 2/9/2009
[edit] New Features
- Observer password. Gives 2 levels of authentication, user and observer
- Performance improvements
[edit] Errata
- None
[edit] Firmware v1.1
[edit] Errata
- Authentication Enable updated by config file. This could be a problem if a user loads another user's config file who has this set differently.
- Time <= exit condition only exits at zero, not at specified time.
- also v1.2+ Errata
[edit] Firmware v1.0
[edit] Errata
- Outputs assert ON for 1-2 seconds at bootup.
- AutoRefresh defaulted to Off. Should be defaulted On
- Can't share config files with other versions (only v1.0).
- HTTP port updated by config file. This could be a problem if a user loads another user's config file who has this set differently.
- also v1.1+ Errata
