Ethernet Settings

From ECCWiki

Jump to: navigation, search


The controller must be reset in order for Ethernet Settings to take affect. Settings on this page are not saved in configuration files.

[edit] Current Settings

Current Ethernet settings.

[edit] Update Settings

  • Static IP Address - Address applied to the controller when DHCP is disabled or timed out.
  • Enable DHCP - If enabled, tries to obtain an IP address from the network DHCP server at powerup. Continues to try until 20 second timeout.
  • Set Subnet Mask
  • Set Gateway
  • Set MAC Address
  • Port - The port for HTTP requests.

[edit] Link Statistics

Statistics and logging of Ethernet activity.


Back to User Interface Documentation

Retrieved from "http://www.embeddedcontrolconcepts.com/wiki/index.php?title=Ethernet_Settings"